Close
Our store is at 0% of its capacity at the moment.
Your order should be processed within 30 day(s).

ニュース RSS

For Genesis hop units in the current batch 5, we've been alerted by several customers to a tolerance issue where the standard barrel nut is very stiff to screw into the hop unit in some cases. Some customers have struggled greatly with this. All of the barrel nut threads on this batch were inspected and fitted with a barrel nut as part of our Quality Control inspections for 7 weeks in Autumn 2023 before anodising, all of them passed so we believe this issue has arisen from a small increase in surface layer thickness from the gold anodising, indicating tolerances...

続きを読む

After 6 months, we have officially COMPLETED BETA TESTING of our Zenith Kit for the GHK G5. Our 10 beta testers did an amazing job getting through more than 104,000 rounds across 42 game days and 11 guns this summer. This included testing with HPA adaptors, CO2 and a Bullpup kit. None of them cracked or suffered any other malfunction. NOT A SINGLE PROBLEM, NO CRACKING! WE HAVE FIXED THE G5 RECEIVER CRACKING PROBLEM! To celebrate we'll be launching our first range of parts for the G5 in the next week or so - a variety of steel charging handle...

続きを読む

We get asked all the time what order you should upgrade your KC-02 and how much it costs for a full build. So we've put together this tier list that shows the suggested route for what order you should spend your hard-earned hobby dollars.    Standard upgrade path for KC-02Tier 0Buy the gun £300 or whatever used. Bunch of mags £200, C02 best, around £35 each.Or a HPA adaptor if you fancy that route. £500 so farTier 1 - the basics(don't have to buy all at once, but recommended in this order) RW V3 piston £33RW V14 bolt carrier £65(a...

続きを読む

どの部品が KC-02 の新しいノブリッチュ バージョンと互換性があるかを示すために作成したこの PDF 互換性チャートをチェックしてください。 もうすぐ完全な記事を作成します。

続きを読む

さて、KC-02 プラットフォームはもう完成したと思っていたので、これら 2 つの新製品は少し驚かれた方もいるかもしれませんが、実はこのレモンから搾り取れる果汁はまだあることが分かりました。 アウター バレルを 1 つの部品として作ろうとすると製造コストが高すぎるため、私たちは長い間アウター バレルを無視していましたが、数か月前、アウター バレルをいくつかの部品に分割し、ネジで固定するだけで済むことに気づきました。それを設計するのに十分な仕事をしてください。そして、バレルの中央セクションが機械的要件から解放されることに気づいてから、私たちは設計で本当に創造力を発揮しました! そして、芸術的創造性のスケールの対極にあるのが、新しいマスタープレシジョン レールです。これは完全に単一のパフォーマンス係数の向上を目的とした設計です。既存のホップ調整システムを窓の外に投げ捨て、新しいものを作ります。それは大幅に強化されています! レール ホップ クリッカーの位置は、標準の KC-02 がホップ ホイールに使用する M4 x 0.7 ネジとともに、常に制限要因でした。これをギロチン レールでも再現する必要がありました。純正部品との互換性を維持するため。したがって、互換性のラインから抜け出すには、それを価値のあるものにするために非常に大きなものが必要になります。 私たちが「カテゴリー A」製品と呼ぶものは、「銃の性能に大幅かつ測定可能な改善、または新しい機能」を提供するものです。新しい M16 x 0.5 ネジと 100 個のダブルデテント放射状クリックにより、標準ホップ ホイールの 4 倍以上のホップ調整分解能が提供され、多くの人が感じる「クリック間のクリック」が得られるため、Master-Precision レールはその基準を満たしています。極端な長距離射撃に必要です。

続きを読む